Tag: Driveways

  • Driveway Demolition, Santa Clara Job

    Driveway Demolition, Santa Clara Job

    In January 2023 we demolished an existing concrete driveway on our Santa Clara job to make way for new concrete.

    DateJanuary 2023
    ScopeDriveway demolition

    Good demolition sets up a good pour. We saw-cut clean edges where the new work meets the old, break out and haul off all debris, and check the subgrade underneath. Many driveway failures start with base problems that stay hidden until the old slab comes out.

    Need a failing driveway removed and replaced? Get a quote.

    Project photos

  • 3,000 sq ft Driveway Remove and Replace

    3,000 sq ft Driveway Remove and Replace

    From January 7 to January 12, 2022 we tore out and replaced a 3,000 square foot driveway at a large home.

    Area3,000 sq ft
    DatesJanuary 7–12, 2022
    Concrete3000 PSI, 5 in. thick
    Reinforcement3/8 in. rebar @ 12 in. OCEW
    FinishBroom

    Process

    • Demolish existing driveway and haul off spoils
    • Prep and compact the base
    • Set forms and tie 3/8-inch rebar at 12 inches each way
    • Place 3000 PSI concrete at 5 inches thick
    • Broom finish

    We poured it 5 inches thick instead of the usual 4, which gives it more strength for heavy vehicles and long driveways. Request a quote.

    Project photos

  • Driveway Additions and Back Patios in San Antonio

    Driveway Additions and Back Patios in San Antonio

    Adding on to a driveway or patio is one of our most common residential jobs. Here are three San Antonio projects from 2021.

    LocationSan Antonio, TX
    DatesJune, August & December 2021
    Concrete3000 PSI, 4–5 in. thick
    Reinforcement3/8 in. rebar @ 12 in. OCEW, doweled
    FinishBroom

    Patio, driveway add-on and sidewalk, August 2021

    Over two days we poured a back patio, a driveway add-on and a sidewalk: 3000 PSI concrete, 4 inches thick, with 3/8-inch rebar at 12 inches each way, doweled into the existing concrete.

    Patio with perimeter beam plus driveway extension, June 2021

    For this back patio add-on we poured 5-inch concrete with a perimeter toe beam 12 inches deep by 8 inches wide. We also poured a 4-inch driveway extension, both reinforced at 12 inches each way.

    Driveway and patio addition, December 2021

    We added on to the driveway and back patio with 3/8-inch rebar at 12 inches each way and 4-inch, 3000 PSI concrete.

    Why doweling matters

    When new concrete meets old, we drill into the existing slab and set rebar dowels. That keeps the two slabs from shifting apart and cracking at the joint.

    Get a quote for your addition.

    Project photos

  • Driveway Extensions and Sidewalks: San Antonio, Schertz and Windcrest

    Driveway Extensions and Sidewalks: San Antonio, Schertz and Windcrest

    Three residential jobs from 2021, each built to the same standard.

    LocationsSan Antonio, Schertz, Windcrest
    DatesJuly–December 2021
    Concrete3000 PSI, 4–5 in.
    Reinforcement3/8 in. rebar @ 12 in. OCEW

    Driveway extension and walkway, San Antonio

    In December 2021 we poured 5-inch, 3000 PSI concrete over 3/8-inch rebar with a broom finish.

    Sidewalk and driveway add-on, Schertz

    In August 2021 we poured 4-inch, 3000 PSI concrete with rebar at 12 inches each way, doweled into the existing patio.

    New sidewalk, Windcrest

    In July 2021 we poured a sidewalk to the same spec, doweled into the existing patio for a tight, lasting connection.

    Request a quote.

    Project photos

  • Exposed Aggregate Driveway and Patio

    Exposed Aggregate Driveway and Patio

    Exposed aggregate shows off the stone inside the concrete and gives a high-end, slip-resistant surface.

    DatesMay 2021
    Finish5/8 in. and 3/8 in. rock wash aggregate

    Driveway remove and replace

    On May 18, 2021 we removed and replaced a driveway, through a lot of rain, and finished it with a 5/8-inch rock wash aggregate.

    Hollywood Park patio addition

    At a home in Hollywood Park, we added onto an existing patio with a 3/8-inch wash aggregate finish to match.

    How it’s done

    After placement, the surface paste is washed off at just the right time, exposing the aggregate. Timing and weather control the result.

    Request a quote.

    Project photos